Aero Sense ICE-5, Turbine Fuel Additive - Anti-Icing (1 litre)
Pooleys stock code: SGE212
ICE-5 fuel system icing inhibitor (FSII): a fuel anti-icing additive for turbine fuel that acts as a fuel icing inhibitor. ICE-5 is mixed in the fuel at rates of 0,10% up to 0,15% by volume. If the aircraft has no heating system for the fuel, small amounts of free water in the fuel can freeze and block fuel lines, filters and valves. Properly used ICE-5 will prevent icing of the water in the fuel system. A positive side effect of ICE-5 is inhibition of bacteria-growth in fuel tanks.
|Certification||ICE-5 complies with ASTM D4171-03, chemical properties according to MIL-DTL-85470 (replacing MIL-DTL-27686), DEF STAN 68-252, AL-41. NATO Code number S-1745.|
|Application||It is very important to mix carefully the fuel with the icing inhibitors such as ICE-5 DiEGME! Just pouring the product in the tanks will result in insufficient mixing and separation of the inhibitor and the fuel. For direct addition at refuelling, ICE-5 aerosols are very handy. The aerosols are delivered with a flexible tube and a clip for direct dosing in the stream of the jet fuel which is coming out of the nozzle. ICE-5 is usually mixed in the fuel at rates of 0,10% - 0,15% by volume.|
Why should you use a fuel additive?
A fuel system icing inhibitor (FSII) is an additive for aviation fuels that prevents the formation of ice in fuel lines. Jet fuel can contain a small amount of dissolved water that does not appear in droplet form. As an aircraft gains altitude, the temperature drops and the jet fuel's capacity to hold water is diminished. Dissolved water can separate out and could become a serious problem if it freezes in fuel lines or filters, blocking the flow of fuel and shutting down an engine. ICE-5 fuel anti-icing additivecontrols icing in aircraft fuel by depressing the freezing point of water.
Why should you use ICE-5 fuel system icing inhibitor?
ICE-5 fuel anti-icing additive is authorized by the ASTM D4171-03 standard for use in civilian jet fuels as a fuel system icing inhibitor and is chemically formulated according to the United States Armed Forces Military Specification MIL-DTL-85470B (replacing MIL-DTL-27686). ICE-5 is mixed in the fuel at rates of 0,10% up to 0,15% by volume. ICE-5 must be distributed evenly throughout the fuel. Simply adding ICE-5 after the fuel has been pumped is therefore not sufficient! For direct addition at refueling, ICE-5 aerosols are very handy. The aerosols are delivered with a flexible tube and a clip for direct dosing in the stream of jet fuel coming out of the nozzle. One aerosol of 500ml ICE-5 can treat from 330 liter (88 US gallon) up to 500 liter (133 US gallon) of fuel.
How do you store ICE-5?
It is extremely important to store ICE-5 properly - must be kept clean and dry, since the additive can absorb water directly from moisture in the air.
- Liquid products are subject to shipping restrictions and can only be supplied by courier to the UK, Ireland & Mainland Europe.
- This product is not available for guaranteed next day delivery. Please allow 5 days for despatch.
CLICK HERE TO SEE: TECHNICAL SPECIFICATION SHEET
£19.13 £22.96 inc. VAT (20%)*
Share this product:
Aero Sense, AL-5 TKS Deicing Fluid (10 litre)
£88.99 inc. VAT (20%)View Product