Complete Kit with Holder for multiple devices including phones, whilst in a case or skin.

Pooleys stock code: RAM-HOL-PD3KIT

This holder is designed for the following devices:
DELL AXIM X3, AXIM X30, AXIM X50, AXIM X50V, AXIM X51 & AXIM X51V

HP IPAQ 200, 210, 211, 212 & 214

HP IPAQ H6300 H6315, H6320, H6325, HW6510, HW6515, HX2000, HX2100, HX2110, HX2400, HX2415, HX2490, HX2700, HX2715, HX2750, HX2755, HX2775, HX4700, HX4705, RX3115, RX3715, RX5915, RX5935, RZ1700 & RZ1710

PALM III, M100, M105, M125, M130, M500, M505, M515, T/X, TUNGSTEN, V, VX, ZIRE & ZIRE 21

TOSHIBA E300, E310, E330, E350, E355, E740, E750, E755 & E800

Clamping Dimensions: Height Range: 4.75" - 6.25". Width Range: 2.25" - 3.25"

Material: High Strength Composite

Note: The holder includes a set of two nuts and bolts to connect to any of the RAM compatible components.

ACCESSORY: Diamond connecting plate.

ARM: The standard double socket arm, has a socket at both ends that accommodates connecting balls. A spring loaded adjustment knob opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: overall length: 94mm. Socket-to-socket length: 76mm

Base Choices (SELECT YOUR PREFERENCE FROM THE DROP DOWN LIST BELOW):

1. RAM-B-166 Twist lock suction cup mount consists of a 3.25" suction cup locking base and diamond plate end. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has an adjustment point at the holder and base. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your handheld device in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device.
2. RAM-B-149ZA U-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware that accommodates rails from 0.5" to 1.25" diameter.
3. RAP-B-397-1-238 Small Tough-Clamp base The RAM Tough-Clamp includes a 1" ball which can be used to mount a variety of products utilising RAM's vast selection of mounting solutions. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
4. RAP-B-400-238 Small Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
5. RAM-B-121-238 Yoke clamp Base, standard double socket Arm and diamond plate accessory. The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The ball connector is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail.
6. RAP-B-397-2-238 Medium Tough-Clamp (includes a 1" ball which can be used to mount a variety of products utilising RAM's vast selection of mounting solutions. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Dimensions: 1. Flat surfaces and square rails from 0" to 1.75" thick. 2. Round rails from 0.75" to 1.125" OD.
7. RAM-B-127B This clamp base is designed to mount to the lip/edge of a flat surface up to 1.12" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplane. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diameter arm socket and connection plates to create the perfect mount for your application.

Share this product: